Build a race car for £999.00 challenge

got my head gasket from strider, it cost £80 delivered and had it in slightly under 2weeks.

Ross

what head gasket did you get of strider mate ?

the mls headgasket that they were talking about above^^^^

im keen to see pictures of that diff in the justy rear end.
dan

motoboy wrote:im keen to see pictures of that diff in the justy rear end.
dan

Just waiting for the M3 Evo Diff cradle to turn up & we will see how practical fitting it will be, also got some M5 rear shafts for £20.00 too

This diff will kick ass!!! and has the same ratios as the Swift AWD rear.

Should be strong enough to lift the front wheels off the ground on take off .

Get the cutting disc's ready Jerry

garndi wrote:This diff will kick ass!!! and has the same ratios as the Swift AWD rear.

Should be strong enough to lift the front wheels off the ground on take off .

Get the cutting disc's ready Jerry

LOL, still waiting for the diff carrier & M5 shafts to turn up, then we can start cutting

any news or updates or was the project abandoned?

GTP

gtpswift wrote:any news or updates or was the project abandoned?

GTP

Not abandoned, just still sat in our yard waiting to be worked on. The event is in September so still plenty of time

Just noticed the alloys on the car. If they are league 111 bandits could I have the centre caps?

well?
where/how did this go?

gtpswift wrote:well?
where/how did this go?

It took a different path

And how did it go?
what happened, how did it happen

GTP

What happened was Jerry got a plasma cutter....

I can see what was done I just dont know why, what happened witht he justy, the BMW diff the other bits and pieces.
Did it work, did they win, lose or place 16th
GTP

Are you sure the air filter is ok down there
Allan

can you say hydraliced

well?

gtpswift wrote:well?

All finished a while ago: