Justy/GTi exhaust
4 posters
Page 1 of 1
Justy/GTi exhaust
Hello has all!
Then here is I am going to put the engine of a GTi in my Justy but I have a question (because all the others have to find answers ^^)
For the escape, how takes place the modification? That of the justy goes or that of the GTi or then it is necessary to modify its to pass?
So for the driving steering wheel I get back that of Justy and I stick the clutch of the GTi it is good her?
Thank you has you!
Ps: forgiveness for my English but I use a translator thus be indulgent with me ^^
Then here is I am going to put the engine of a GTi in my Justy but I have a question (because all the others have to find answers ^^)
For the escape, how takes place the modification? That of the justy goes or that of the GTi or then it is necessary to modify its to pass?
So for the driving steering wheel I get back that of Justy and I stick the clutch of the GTi it is good her?
Thank you has you!
Ps: forgiveness for my English but I use a translator thus be indulgent with me ^^
flamby43- Posts : 6
Join date : 2011-10-12
Re: Justy/GTi exhaust
it doesn't make much sense with a translator, or try using a better one.
Almondo74- Posts : 961
Join date : 2009-07-25
Age : 34
Location : Cornwall
Character sheet
first car: Swift GL
Re: Justy/GTi exhaust
As far as I can work out, his first question is about the exhaust and wether or not he can use the Justy exhaust or not.
The second question is either about the steering wheel or I think it's actually about the flywheel and clutch and how the engine mounts to the gearbox!
But it would definitely be worthwhile finding a better translator!
The second question is either about the steering wheel or I think it's actually about the flywheel and clutch and how the engine mounts to the gearbox!
But it would definitely be worthwhile finding a better translator!
InstantCustard- Posts : 205
Join date : 2010-11-29
Age : 41
Location : Camberley, Surrey
Re: Justy/GTi exhaust
Sorry !
Yes my first question is about exhaust !
I wanted to know what is going on the adaptation of the exhaust, if it is necessary for me to do a custom or that of the justy or the GTi will do?
Then yes it is a question on the flywheel, I realized the importance of using one of the justy but for the clutch, which should I use? that of the justy or that of the GTi?
Thank you!
Yes my first question is about exhaust !
I wanted to know what is going on the adaptation of the exhaust, if it is necessary for me to do a custom or that of the justy or the GTi will do?
Then yes it is a question on the flywheel, I realized the importance of using one of the justy but for the clutch, which should I use? that of the justy or that of the GTi?
Thank you!
flamby43- Posts : 6
Join date : 2011-10-12
Re: Justy/GTi exhaust
I believe the Justy and GTi exhausts are different enough not to be interchangeable, however the Justy exhaust is quite simple so should be easy/cheap enough to have one made see here
GTI downpipe and CAT Converter and custom back from joint
As for the Clutch, use justy flywheel, clutch and friction plate.
GTP
GTI downpipe and CAT Converter and custom back from joint
As for the Clutch, use justy flywheel, clutch and friction plate.
GTP
gtpswift- Posts : 398
Join date : 2009-05-25
Location : Melbourne Australia
Re: Justy/GTi exhaust
ok thank you!
And also what make internal diameter, if I made a homemade online?
And also what make internal diameter, if I made a homemade online?
flamby43- Posts : 6
Join date : 2011-10-12
Re: Justy/GTi exhaust
For a NA engine I believe the ideal diameter is 2 - 2 1/4 inch and for a turbo engine 2 1/2 inch.
InstantCustard- Posts : 205
Join date : 2010-11-29
Age : 41
Location : Camberley, Surrey
Re: Justy/GTi exhaust
Ok so about a 50 mm! But is not it too? on my Delsol, I have a line 50 mm but it is a 1600cc! 45 mm may be more appropriate right?
Otherwise I'd do in a 50mm with tubes and elbows!
Otherwise I'd do in a 50mm with tubes and elbows!
flamby43- Posts : 6
Join date : 2011-10-12
Re: Justy/GTi exhaust
Most people use a 2 1/4 inch, it's actually proven to have the best flow, especially if you have or are planning to up the power.
InstantCustard- Posts : 205
Join date : 2010-11-29
Age : 41
Location : Camberley, Surrey
Re: Justy/GTi exhaust
Hello again,
In fact I have another question, this one for the header / catalytic how did you manage to get the catalyst for the GTi?
Because we are in France you can not put CAT converter for the MOT!
So if you have a tip I take too!
thank you
In fact I have another question, this one for the header / catalytic how did you manage to get the catalyst for the GTi?
Because we are in France you can not put CAT converter for the MOT!
So if you have a tip I take too!
thank you
flamby43- Posts : 6
Join date : 2011-10-12
Similar topics
» gti justy exhaust?
» Exhaust.
» standart exhaust with manifold and cultus exhaust
» CAT / EXHAUST
» Gti exhaust
» Exhaust.
» standart exhaust with manifold and cultus exhaust
» CAT / EXHAUST
» Gti exhaust
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|