MK2/3 GTi brakes on GLS

I want to run gti brakes all round and wondering if:
1) i can use GTi hubs and 1.0 diveshafts
2) rear brakes are bolt off bolt on?

thanks..

the rear brakes you need gti hubs cables and to change the brake lines the hub splits in the middle

as for the front ive never worked on a 1.0 hub. I know people have used parts of the gearbox to gain a shorter final drive you will need to mesure the diameter of a 1.0 shaft splined section then i can check it against a gti one if ya like.

or if your going to convert to gti enginje soonish just weight and buy a whle gti will be much easier

steve

Well i want to convert to GTI but i have no space for extra car even for few days i would need to take the engine out..

wil try to get the measurments of 1.0 shaft..

when i done the front off my 1.3 8v i had to use hubs ,shocks ,driveshafts the lot and then had to get bigger wheels as there was no gap between the 13 inch wheels and the calliper

1.0 outer CV's have 23 splines....


how many on GTI CV's?

anyone?

The GTi CV is different to the 8v, you will require GTI shafts to fit the GTI hubs.

mine is 6v... so i was thinking... could i fit outer CVs to my shafts and use gti suspension leg? cos my engine is shorter due to beeing 3 cyl and not 4.

Hi,

When time come to take out G10 engine and everthing else. Let me know.
I want engine, wiring harness, inlet, exhaust..... basically all I need to run 3 pot engine.

pm me if you need to talk about it sometime in the future!

Cheers
Atchi

yeah will do mate. looking at july/august time realisticly though.

iv got a 1 litre sat in my drive, give me a shout if u want the bits but it wont be until im ready to scrap the car, or buy another swift for spares lol

Ross