engine swap

I have just bought a 94 Justy 5spd. it does need an engine swap, which engines fit? Does the gti 1.3 16v fit?

Many thanks, any help appreciated.

Hi,

G10, G13B, G13BA fits and even G13BB too.
You will need a correct ECU with wiring harness to run any motor you want.
If you change gearbox to 1600AWD, you can fit a Vitara G16 enigne to it too.

Cheers
Atchi

a 94 justy is a mk1 made by subaru (the square shape), not a mk2 a suzuki swift chassis(made my suzuki).
I might be wrong but the oldest mk2 justy iv seen is a 96
if its a 1.2 its a mk1, 1.3 is a mk2

any engine can be made to fit but i dont think a suzuki engine will bolt straight in like a mk2.

you might be better off checking the American justy forums, im sure someones put an impreza engine in one.

Oh.... if it is pure Subaru, then Ross is right.
I assumed Suzuki Justy well that Subaru call them.
Flat 4 sounds fun!Someone put Impreza into Rover 200/25/ZR so it must be possible with skill.

Cheers
Atchi

I think it must be a mk1 as it is a 1.2. Might be worth just turbo-ing the original engine then?

there are a few 1.2 turbo's on youtube.

i had a little look the other night at the justy proboards site, someones putting a lexus 1uzfe v8 in there haha

So what's the difference between the mk1 and 2 that means the engine doesn't fit?

I assume mk1 is Subaru build/design cars which uses Subaru 3 pot engines.
Suzuki Justy is rebadged Swift AWD.
This mark will be able to use Suzuki engine and so on as well as 4-5 different engines.
G10, G10T, G13B, G13BA & G13BB.
G10 is 3 pot 993cc engine and in North America, you have G10T(Turbo).
G13B is DOHC 16v 1298cc engine and G13BA is long stroke 1300cc.
G13BB is from newer Jimmny, I think.

All of above engine code uses same bell housing design.

Cheers
Atchi

the mk1 & 2 are completely different cars.
as Atchi said you can bolt any g series engine into a swift chassis they all fit on the same mounts.
the mk1 justy isn't a swift chassis. its subaru's own car (not re-badged)
i don't know it doesn't bolt straight in, i've never owned a mk1 to look, but the idea it would bolt straight in is inconceivable as there is no relation between the cars at all.