Compression vs. turbo pressure
2 posters
Page 1 of 1
Compression vs. turbo pressure
Before i changed my head gasket (1,2mm) I had steady 0,5 bar pressure on gauge
now when its 2mm gasket up,i have barely 0,3 bar.
My question is,if I have bit lower compression now,should pressure be the same?
now when its 2mm gasket up,i have barely 0,3 bar.
My question is,if I have bit lower compression now,should pressure be the same?
redline- Posts : 21
Join date : 2011-09-28
Re: Compression vs. turbo pressure
By fitting thicker head gasket, you have reduced your compression ratio.
So this mean you can increase or need to increase your boost to get same as before.
You have more volume than before in your chamber.
Cheers
Atchi
So this mean you can increase or need to increase your boost to get same as before.
You have more volume than before in your chamber.
Cheers
Atchi
Miniswift- Posts : 492
Join date : 2008-03-13
Age : 50
Location : Newton Hall, Durham
Re: Compression vs. turbo pressure
Thank you very much achi.
I was thinking same way,just wasn't sure,so it is better to ask.
I was thinking same way,just wasn't sure,so it is better to ask.
redline- Posts : 21
Join date : 2011-09-28
Similar topics
» GT1549s turbo kit and low compression engine
» VF45 turbo over VF38 turbo?
» swift gti supercharger what low compression pistons
» wanted suzuki swift gti low compression pistons
» Pistons for high compression engine build HELP ME
» VF45 turbo over VF38 turbo?
» swift gti supercharger what low compression pistons
» wanted suzuki swift gti low compression pistons
» Pistons for high compression engine build HELP ME
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|