I'm on a magazine!
2 posters
Page 1 of 1
I'm on a magazine!
Hi,
Many of you know that I'm building a Mini with G13B engine.
I had a photo shoot in Jan this year and now I'm on Mini Magazine June issue.
I haven't finished my Mini yet but it is "on the job" section and 3 pages of it.
When you go to Library service of WHSmith, you just check it out!
Description is bit wrong but I will have 140Bhp with R1, cams and modified head!
Also, I got next engine setup to follow so it isn't too far out!
I look wide due to lens camera man used!...... so I hope.
Cheers
Atchi
Many of you know that I'm building a Mini with G13B engine.
I had a photo shoot in Jan this year and now I'm on Mini Magazine June issue.
I haven't finished my Mini yet but it is "on the job" section and 3 pages of it.
When you go to Library service of WHSmith, you just check it out!
Description is bit wrong but I will have 140Bhp with R1, cams and modified head!
Also, I got next engine setup to follow so it isn't too far out!
I look wide due to lens camera man used!...... so I hope.
Cheers
Atchi
Miniswift- Posts : 492
Join date : 2008-03-13
Age : 50
Location : Newton Hall, Durham
Re: I'm on a magazine!
Congrats! want to put more specs of engine? i want 140 hp too
daymoon- Posts : 288
Join date : 2009-10-03
Age : 34
Location : Selby, North Yorkshire
Re: I'm on a magazine!
Hi,
I suppose, you don't know spec of my engine so I tell you.
mk1 Gti Dizzy with a sports coil.
R1 carbs fitted to a custom cylinder head.
Port(matched to gasket size) and polished where it is needed both inlet and exhaust.
skimmed to increase CR.
Suzuki Sports Group A camshafts.
std cast exhaust manifold but with custom exhaust from down pipe on.
Lightened flywheel.
under drive pulley.
3.523:1 final drive ratio with Gti gear ratio.
Suzuki Sports LSD.
All above in a '68 Mini.
I have a freind who made similar mod to gearbox only with a std Gti engine.
He did 0-60 in 6.5 secs so I will be happy with that!
Cheers
Atchi
I suppose, you don't know spec of my engine so I tell you.
mk1 Gti Dizzy with a sports coil.
R1 carbs fitted to a custom cylinder head.
Port(matched to gasket size) and polished where it is needed both inlet and exhaust.
skimmed to increase CR.
Suzuki Sports Group A camshafts.
std cast exhaust manifold but with custom exhaust from down pipe on.
Lightened flywheel.
under drive pulley.
3.523:1 final drive ratio with Gti gear ratio.
Suzuki Sports LSD.
All above in a '68 Mini.
I have a freind who made similar mod to gearbox only with a std Gti engine.
He did 0-60 in 6.5 secs so I will be happy with that!
Cheers
Atchi
Miniswift- Posts : 492
Join date : 2008-03-13
Age : 50
Location : Newton Hall, Durham
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|