rear camber adjusters
3 posters
Page 1 of 1
rear camber adjusters
started making my rear camber adjusters this week what you guys think
http://www.teamswift.net/viewtopic.php?f=10&t=44868&p=339484#p339484
http://www.teamswift.net/viewtopic.php?f=10&t=44868&p=339484#p339484
swifty- Posts : 375
Join date : 2009-05-26
Age : 36
Re: rear camber adjusters
not bad mate
using the same as the rear toe adjust
it dusnt look like you`l get much adjustment though
how much do you think you will get?
if i ever get round to doing it
when i do the reshell im gona re-fab the rear turrets so the adjustment will come from the top mounts
gary
using the same as the rear toe adjust
it dusnt look like you`l get much adjustment though
how much do you think you will get?
if i ever get round to doing it
when i do the reshell im gona re-fab the rear turrets so the adjustment will come from the top mounts
gary
dominator- Posts : 1298
Join date : 2008-03-16
Age : 44
Location : bournemouth
Character sheet
first car: renult 5 ts (1.7!)
Re: rear camber adjusters
they do look good nice and cheap aswell might do me a set for the justy
steve
steve
STEVEGTI- Admin
- Posts : 1835
Join date : 2008-03-02
Age : 35
Location : london
Character sheet
first car: suzuki swift gti
Re: rear camber adjusters
the slots are 24mm long so hopefully will give enough adjust i read somewere that it was better to make the adjustments at the bottom as at the top of the shock due to the angle or something you have to move the top alot to adjust the camber by not a lot, i could make some more up depending on the price on a wishbone swap type thing as long the wishbones were in reasonable condition will get some more pics up when ther finished
cheers guys
cheers guys
swifty- Posts : 375
Join date : 2009-05-26
Age : 36
Re: rear camber adjusters
the slots might be 24 mm long but how much movement is there on the cambolt you fab`d?
dont forget it should be the centre of the bolt that you want to messure the movement from
how thick is the bolt?
if its 10mm then you`v lost 10mm of the slot allready, 5mm each end
so that will be 14mm of travel
has it got + and - adjustment?
im not trying to piss on you fireworks mate, its a good idea, looks cheap to make but i think its alot of work to get a small adjustment
if you have lowered your swift you will notice it already has a fair bit of camber on the rear
or are you making these with positive camber in mind?
gary
dont forget it should be the centre of the bolt that you want to messure the movement from
how thick is the bolt?
if its 10mm then you`v lost 10mm of the slot allready, 5mm each end
so that will be 14mm of travel
has it got + and - adjustment?
im not trying to piss on you fireworks mate, its a good idea, looks cheap to make but i think its alot of work to get a small adjustment
if you have lowered your swift you will notice it already has a fair bit of camber on the rear
or are you making these with positive camber in mind?
gary
dominator- Posts : 1298
Join date : 2008-03-16
Age : 44
Location : bournemouth
Character sheet
first car: renult 5 ts (1.7!)
Re: rear camber adjusters
yer i no its 14mm travel 7mm pos 7mm neg how angle of camber do u think that wil giv me
swifty- Posts : 375
Join date : 2009-05-26
Age : 36
Re: rear camber adjusters
tbh i have no idea, theres prob some calculations you can do to work it all out but who can be arsed with that, but 7mm of travel dusnt seem much
i guess its a case of suck it and see
gary
i guess its a case of suck it and see
gary
dominator- Posts : 1298
Join date : 2008-03-16
Age : 44
Location : bournemouth
Character sheet
first car: renult 5 ts (1.7!)
Re: rear camber adjusters
yer ill post up my findings when its all on cheers
swifty- Posts : 375
Join date : 2009-05-26
Age : 36
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|