Injector help please?
5 posters
Page 1 of 1
Injector help please?
Hi, well I have narrowed my not firing issue down to the injectors not squirting. Any ideas what could cause this? It's had 2 injectors sets on it nun of them are working an the likeliness of all eight failing is unlikely (right? :s) so what else could cause this?
Any ideas would be much appreciated.
Thanks in advance cam.
Any ideas would be much appreciated.
Thanks in advance cam.
racecams- Posts : 75
Join date : 2011-07-27
Age : 31
Location : Rochester
Re: Injector help please?
The injector part of the loom is pluged in isnt it?
Its right next to them
If not maybe a loose wire
Have you checked all of your earths?
Its right next to them
If not maybe a loose wire
Have you checked all of your earths?
dominator- Posts : 1298
Join date : 2008-03-16
Age : 44
Location : bournemouth
Character sheet
first car: renult 5 ts (1.7!)
Re: Injector help please?
Yh the loom is plugged in. An I did try chase them back as far as I could but couldn't see to far as only had a crap lead lamp on a flat battery. Jus looked on autodata at work an discovered tht I have a code 15 meaning engine coolant temperature sensor fault. Do u think tht could cause it ?
Thanks
Thanks
racecams- Posts : 75
Join date : 2011-07-27
Age : 31
Location : Rochester
Re: Injector help please?
your car used to run on carbs !! have you changed the fuel pump at all ?
steve
steve
STEVEGTI- Admin
- Posts : 1835
Join date : 2008-03-02
Age : 35
Location : london
Character sheet
first car: suzuki swift gti
Re: Injector help please?
It's running at the correct pressure about 32psi it's jus not passing the injectors for some reason.?
racecams- Posts : 75
Join date : 2011-07-27
Age : 31
Location : Rochester
Re: Injector help please?
Yes mate, the ecu water temp sensor will do that, its the blue 1
Takes ages to catch and when it does it cuts out right?
£60 from suzuki!!!
I got a couple cheaper than that, im sure the same sensor fits another car mind
If you cant find one cheap gimme a pm
Takes ages to catch and when it does it cuts out right?
£60 from suzuki!!!
I got a couple cheaper than that, im sure the same sensor fits another car mind
If you cant find one cheap gimme a pm
dominator- Posts : 1298
Join date : 2008-03-16
Age : 44
Location : bournemouth
Character sheet
first car: renult 5 ts (1.7!)
Re: Injector help please?
Na, it won't even fire at all. Jus keeps turning unless u pour fuel in the injector ports.
Where is it on the lump?
Thanks
Where is it on the lump?
Thanks
racecams- Posts : 75
Join date : 2011-07-27
Age : 31
Location : Rochester
Re: Injector help please?
on the right side of the head by the thermostat housing
Almondo74- Posts : 961
Join date : 2009-07-25
Age : 34
Location : Cornwall
Character sheet
first car: Swift GL
Re: Injector help please?
you have change the dizzy back?
hobo- Posts : 593
Join date : 2010-03-19
Age : 34
Location : norfolk (long stratton)
Character sheet
first car: 5
Re: Injector help please?
Thanks tht'll make it much easier to find it in the dark lol. An yh had 2 dizzys on it an one was nearly new an no change. But I snapped the bracket tht holds the dizzy now. Fucksake! Used chemical metal for now but gonna need new one when it's better.
Thanks Cam
Thanks Cam
racecams- Posts : 75
Join date : 2011-07-27
Age : 31
Location : Rochester
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum