wilwood 90 degree hose adaptors???

anybody help me with what 90 degree adaptor i need for the wilwood calipers to fit them, if somebody could send me a link to them on the net would be great, somebody did tell meon here befor but i forgot exactly which ones they said as regards the threads i think!!

Regards Aaron

Try these or something like these.
http://www.ebay.co.uk/itm/Brake-Fitting-1-8-NP-3-90-degree-Wilwood-JFZ-/320638863941?pt=Motors_Car_Truck_Parts_Accessories&hash=item4aa790ca45
http://www.ebay.co.uk/itm/Steel-Adapter-3-1-8-NPT-Wilwood-Caliper-Fitting-/200311584475?pt=Race_Car_Parts&hash=item2ea38036db

I used the second one and a 90 degree on the braided hose I made up. I got mine from the UK but cant find the link at the moment

GTP

Ok I remember this is the part I used
http://www.ebay.co.uk/itm/1-8-NPT-M10x1mm-Brake-Hose-Fitting-Connector-Adaptor-/120726774824?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item1c1be06428
with one of these
http://www.ebay.co.uk/itm/90-Elbow-Female-Concave-3-Hose-M10x1-Aeroquip-Fitting-/230560634921?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item35ae7c1829

Looks very much like this


I took the original rubber hoses and cut the rubber away from the strut bracket and slid the braided hos into it and used it to attch to the strut to reduce vibration, twist and keep it celar of the wheel.

GTP

cant you use a banjo fitting then?

I wasnt able to find a 1/8npt banjo fitting? As that was my preference

GTP

cheers for that gtp, slighty confused about how it all goes together though as ive changed my brake hoses for the stainless hell ones and dont see how i can addapt them for them fittings you have linked me to, maybe more pictures of your setup might help lol bit difficult to tell what u done from that picture u posted.

Regards Aaron

I have custom stainles steel aeroquip fitting hoses as like you the off the shelf items do not fit. Unless you can get a 1/8npt banjo fitting...which I could not find and dont believe exists.
To sumarise. I am not using swaged end stainless lines I used the adaptor and 90 degree elbow with crushable nipple to clamp -3an hose.Ill go get another photo now...though it is dark

GTP

who's a post whore

1/8npt-m10x1 adaptor/ m10x1 -3an 90 degree hose end, -31n stainless braided teflon hose, suzuki brake line sheath flange to strut, m10x1 -31n convex female hose end to suzulki standard hard line.
GTP

ahh now i have a better picture of what needs to be done, next question lol i have the HEL stainless brake lines, could i not cut banjo end off with a cutting wheel and fit the aeroquip 90 degee on to the hel lines? so then ill basicly have the same as you ? bearing in mind my brake hoses are coloured weather or not this makes a differance lol its all a learning curve to me.

I thought about that but decided not to cut up 30 pounds of goodridge hoses which may work? and make these I think they cost less that 30 all up. I was afraid the goodridge ones may be too short once cut...but I didnt measure them.

GTP