cams

just refitted my 952 cams, i forgot what a good sound they make

gary

make a little video i want to hear !

showoff!!! =p

ive just got a set of piper cams the bp270 profile the fast road cam and im having trouble setting them up should i go for a tune or is there an easy way 2 get them set up.

i would go and see a good tuner for that mate

gary

i use those cams leachy. Set the inlet cam one tooth advanced and the exhaust cam bang on at top dead center. 0 degrees on the cam cover timing marks. Runs great with this setup, good power to 7200 and plenty of torque through out.

just had mine done
+2 deg on the inlet only,
havnt got a working scanner so i cant put up the graph etc, shes makin 140hp flat from 7600-fuel cut and 108 ftlb from 4200-4850 atw
working it out with the rundown, 162hp and 120 ftlb atf
tbh i want to belive its a 160 hp engine but in real life i doubt it
i didnt get them timed for max power, just a bit more drivability, just doing the intake sorted out the low end torque, if anyones used a set of cams like these you will know what im on about

gary